Crochet Tin Cover

I came up with this simple idea for tin covers so that I had something watertight, flat-bottomed and pretty-pretty to stand my little plant pots in. However, these tins look soooo sweet wearing their crochet coats that I've been making a few more to have around the house. You know, it's always good to have a pretty little something to hold all those Small Things. Hair slides, loose change, buttons, sweets, they all benefit from a sweet little hooky home to live.

I started out using tuna tins (the tin on the right) as these were the perfect shape and height for my little pots. But I've since moved onto pineapple tins (the tin on the left), and have also got my beady eye on a rather large-but-shallow Treacle Sponge Pudding tin. Any tin will do really, this project is very adaptable.

A word of caution about using tins.....they can end up with a devilishly sharp inner edge if you are not careful. Fortunately my tin opener is very efficient and seems to open a tin cleanly and evenly with no jags, but please do take care.

Right, on with the hooky then......here's a little summary of the basic stitches, I'm writing using UK crochet terms ::

sl st [slip stitch] :: insert hook, yarn over, pull the loop back through the stitch, then through the loop on your hook.

dc [double crochet] :: insert hook, yarn over, pull the loop back through the stitch (two loops on hook), yarn over and pull through both loops on hook (note :: this is equivalent to the US sc stitch)

htr [half treble]:: yarn over, insert hook, yarn over, pull the loop back through the stitch (three loops on hook), yarn over and pull through all three loops on hook (note :: this is equivalent to the US hdc stitch)

When you make your slip knot to start, make sure you leave a decent length "tail end" as shown above. You'll be using this to sew up with, and there's nothing worse than fighting with a too-short end.

You need to make a foundation chain to fit snuggly around your tin. Remember that crochet stretches, so aim to make it on the snug side. For my tuna tin, I used a dk weight cotton yarn on a 3.5mm hook, and made a starting chain of 46+1 for turning.

For the first row, begin in the 2nd chain from the hook and work a row of double crochet.

When you get to the end of the row, bend the crochet round and make a slip stitch into the first chain to join the row and form a ring. Fasten off (as above)

Before you go any further, you'll need to join up the foundation chain. Using a darning needle, thread the long tail end of yarn that you left when starting the chain, and use this to make a few stitches to join the ring completely.

It should now look like a crocheted bracelet, as shown above.

NOTE :: For all subsequent rows, you'll be working out of BACK LOOPS ONLY and you'll be working all rows with the right side facing you, so no turning of the work.

Row 2 ::  Insert hook through the back loop of the first stitch, draw through a loop from the new colour yarn and chain 1 (as above). I've found there's no need to knot the yarn ends together, just hold onto the end of the new yarn as you pull it through to stop it slipping and create the first stitch.

You'll be working a row of double crochet, back loops only.

Remember to hold both tail ends horizontally along the top of your stitches as you work, passing the hook underneath them (as above). This effectively "traps" the ends in as you work, meaning no tedious darning in, yaayyy!!!

Do this for about 8 or 10 stitches, then you can go back and snip the ends off at the end.

Work you way to the end, then join the round by making a slip stitch into the very first chain you made, see where I've put my needle?

Fasten off. You should now have the beginnings of a neat ring.

All you have to do now is to keep adding more rows until you reach the height of your tin.

You can make each row a different colour, or you can work two rows to each colour if you prefer. If you are keeping the same colour as the previous row, no need to fasten off between rows. Simply make a slip stitch as normal to close the round, then chain 1 and go straight into working the subsequent row (as above).

I found that it's best to make the cover ever so slightly taller than the tin itself. For my tuna tins, I made 8 or 9 rows, then went on to the edging.

:: SCALLOP EDGING ::

For the scallop edging, first make a row of dc (the pink row above). Join it with a slip stitch as normal but do not fasten off.

Skip 1 stitch, then make 4 htr's into the next stitch (as above).

Skip 1 stitch, then slip stitch into the next stitch. Scallop made.

Skip 1 stitch, 4htr's into next stitch, skip 1 stitch, slip stitch into next stitch.

Repeat this pattern all the way round till you get back to where you started. Fasten off.

:: BEADED EDGING ::

Now I'm going to tell you about making a sweet little beaded edging. Such fun!!

First you need to get some beads. They need to have a big enough hole to be threaded directly onto the yarn. You might find it easier to thread them if you wrap a small bit of sellotape around the end of the yarn first.

You need to thread all your beads on at once, in the order you'll be crocheting them in. Please make sure you thread enough (if in doubt, put a few extra ones on!). Some basic mathematics are needed here, I'll try and keep it simple. I had 46 stitches in my rows, so I could either add a bead every two stitches (23 beads needed) or every three stitches (15 beads needed with an odd stitch left over).

Once you've threaded all your beads, push them right down the length of yarn as you won't be needing them for a bit. They just need to sit there waiting.

Use the beaded yarn to crochet a normal row of dc (just ignore the beads at this point, push them way down so they don't get in the way). Close the round with a sl st as usual, then chain 1 and TURN THE WORK.

 You'll be working this beady row from the WRONG SIDE, as above. Work in the Front Loops Only (ie the loops of the stitches that are nearest to you as you look at the Wrong Side of the work).

For this example, I'm spacing the beads with 2 stitches between. So work 1 dc in the first 2 stitches (as above)

Now pull the first bead down the yarn until it reaches the crochet. Work 1 dc into the very next stitch (don't skip any stitches), making sure you yarn-over on the far side of the bead (as above)

See how the first bead is kept in place? Clever eh?! Now work 1 dc into the next stitch.

To recap :: you worked dc twice, then pulled the bead into place, then did dc twice again (4 stitches in total, with a bead in the middle). That's basically the Beady Method.

So keep going :: pull a bead into position, then work 1 dc into the next 2 stitches. Pull a bead down, then dc twice. Easy? Yeah!!

See how it's looking from the Right Side? A neat row of evenly spaced, hooky beads is forming. Lovely!

If you counted right, you should have enough beads to get you all the way round with even spaces between. Finally, make a slip stitch into the first chain and fasten off.

Darn in the end and................................

Ta-dah!!! One sweet little beady-edged tin cover.

Now you've got the basics, you can go for it. Unfold your Creative Wings and fly, fly, fly.

You can find my Tin Ta-dah post here.

Pattern for Teeny Tiny Flowers (and leaves) can be found here.

Pattern for Little Picot Flowers can be found here.

Please do let me know how you get on? And remember we'd love to all see what you come up with so it'd be fabulous if you could add some pics to the Attic24 Inspired Flickr group here.

Have lots of tinny, hooky fun my lovelies!

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

♥

All my tutorials are created for you to use and enjoy for free, I absolutely love making them and spreading the Hooky Love.  But as I'm sure you can appreciate, they take a lot of time and energy to create. Absolutely ooodles of it. So if you would like to support what I do here in the Attic you can make a small donation......

xx Thank you so much as always for your support and hooky love, it's very, very much appreciated. Wishing you many happy, blissful hours of joy with hook and yarn xx

♥

Comments

[Coffee Vending Machine]

Very Creative Post Thanks You

[Alejandra]

Me encanta tu pagina Lucy, llena de color e imaginacion. La sigo periodicamente. Me he inspirado para hacer una manta ripply. Ya he practicado el punto !!! Sale genial
Felicitaciones desde Hurlingham Argentina
Alejandra

[lorenza marengo]

So cute!Happy new year!

[Kath Lyle]

I absolutely adore your patterns and find your blogs inspiring (especially as I'm from the same town as you) . I'm very new to crochet and find that your tutorials are very easy to follow and have clear instructions.

Keep up the good work :)

Kath

[emma taylor]

These are so colourful and cute - i am not a crafter at all! Do you sell themm anywhere??

[Maria]

Muy bonitos tus trabajos te felicito. :) te invito tambien a que pases por mi blog vamos animate MUCHAS GRACIAS :( http://manualidadyreciclado.blogspot.com/

[Sandra Regina Rosa]

Você tem as mãos de fada.
fico encantada cada vez que vejo seus trabalhos.
Deus te abençoe sempre

[veronica casabonne]

desde que descubri tu blog no paro de mirarlo y copiar muchas de tus ideas!! ahora estoy muy entretenida con tus archivos asi no me pierdo de nada!! me gustan mucho los blogs que recomendas, me dan muchas ganas de crear!! Desde G.Pico, Argentina, cordiales saludossss

[Lynne]

Cleaver idea, so useful, and so colorful that I must give it a go. Thank you for sharing.

[Michaela]

Lucy, I just love your blog and all the wonderful patterns you post. They have been an inspiration to me as a newbie and your tutorials are so easy to follow. I always thought of crochet being fuddy duddy and dull, but you have helped me see how fun, exciting and colourful it can be. And I'm really enjoying experimenting with colours and patterns. I'm a real visual person, so the photos really help. Thanks for taking the time to put all this up for us. Have you thought of making a book of your projects? Thanks very much :-) xxx

[Gillian Mellström]

Hi there!

I just wanted to take a second to say "Thank you!" for taking the time to DO this site!! I moved to Sweden 25 years ago (I lived in Leeds, England before)and have now developed a passion for crafting! Its not always easy to do in Swedish and I just wanted to say I appreciate the time and effort it must have taken to get your site up and running to the standard it is!! Phew! A right mouthful!

Anyway, as I said before "Thanks!"

Gilly Mellström, Sweden

[Pam Chan]

Great! Must give this a go! I love recycling things and my boring old saucers can get chucked out or made into something else! The cat doesnt eat the smaller tins these days, all pouches, but I sure I will find something to eat!

[Prof. Rosita Torres]

Gracias Lucy por compartir tan preciosa decoració, lo usaré para mis tiestos de interior. Muy coloridos. Me gusto mucho tu tutoriial. Dios bendiga tus creadoras manos. Desde la Isla de Puerto Rico te envio un fuerte abrazo. Muchas bendiciones para ti y toda la familia.

[Amina]

Lovely work ,want to do all your work

[Linda]

Just discovered your blog. I love everything about it. I'm going to try the striped granny for an afghan for a VA hospital that is 50 miles away. I'll be sure to visit your blog often!

[ANNA ANDERSON]

lUCY, I JUST WANTED TO TELL YOU THAT EVERYTIME i LOG INTO YOUR SITE, I JUST HAVE TO SMILE! iTS SO JOYFULL AND HAPPY, YOU JUST LIFT MY SPIRITS AND INSPIRE MY CREATIVE SOUL! THANK YOU!~~ANNA

[Ania]

Lucy, I love this pattern!
I used a link to this pattern in my blog, I hope you don't mind.
http://freubelheukske-english.blogspot.nl/

Kind regards, Ania

[Karina]

Hola Lucy!!! Descubrí tú blog hace un par de semanas y me encanta!!!!
Gracias por este tutorial. Un abrazo.

[Roberta Fontanesi]

Bellissimo lavoro,
come tutti i lavori i tuoi lavori Lucy!
Grazie!
Tanti saluti dall'Italia
Roberta
xoxoxoxoxoxoxoxo

[Renee]

I lik reading your blog. Like we are talking over a cup of coffee. :)

[MissFlux]

Hi Lucy! I've made a WHOLE bunch of all your flowers for a spring wreath. I love your flat one but I REALLY love your stuffed OME too. I THOUGHT I could use this pattern to make the tube .. But I can't see that just doing this will form a good tubular stuffed ring as it wouldn't just form a neat circle I'm realizing now. Do you know or have a pattern or tips on how to make the tubular ring that's like the one you made please? Pretty please? :) For now I'll make the flat one .. But I'm DYING to make the tubular one. If you could help that would be wonderful. My email is [email protected] or my blog is stitchbitch.tumblr.com. I'm just a beginner who has moved in leaps and bounds because of YOUR blog. You are my mentor, hero .. The person I want to be and all :) Sorry to put this here I couldn't see how to just contact you. Thanks ever so much, and thankyou in advance if you can help with the tubular ring :))

[flor]

tus trabajos estan buenisimos, me encantan tus diseños!!!

[Isangel]

Que bonitoooooooo!! Graciasssssssss

[amina]

vraiment magnifiques, bonne continuation.

[chrisatinea]

Merci pour ce tuto !
C' est trop joli !
Chrisatinea